| Security Features | 75
is “admin”. Both you and the user can log into the web user interface, and you will see all of the user options. The
default username and password for user is “user”.
For security reasons, you should change the default user or administrator password as soon as possible. Since the
advanced menu options are strictly used by administrator, users can configure them only if they have administrator
privileges.
•
User and Administrator Identification Configuration
•
User Access Level Configuration
User and Administrator Identification Configuration
The following table lists the parameters you can use to configure the user and administrator identification.
Parameter static.security.user_name.user <y0000000000xx>.cfg
Description It configures the user name of the user for phone’s web user interface
access.
Permitted Values String within 32 characters
Default user
Parameter static.security.user_name.admin <y0000000000xx>.cfg
Description It configures the user name of the administrator for phone’s web user
interface access.
Permitted Values String within 32 characters
Default admin
Parameter static.security.user_name.var <y0000000000xx>.cfg
Description
It configures the user name of the var for phone’s web user interface access.
Note: It works only if “static.security.var_enable” is set to 1 (Enabled).
Permitted Values String within 32 characters
Default var
Parameter static.security.user_password <y0000000000xx>.cfg
Description
It configures the password of the user or administrator.
The phone uses “user” as the default user password and “admin” as the
default administrator password.
The valid value format is <username> : <new password>.
Example:
static.security.user_password = user:123 means setting the password of user
to 123.
static.security.user_password = admin:456 means setting the password of
administrator to 456.
Note: The phones support ASCII characters 32-126(0x20-0x7E) in
passwords. You can set the password to be empty via web user interface
only.
Permitted Values String within 32 characters
Default Blank
To Next Page
Loading...
Need help?
General
