Yealink Teams Series

| Phone Provisioning | 43
Permitted Values
0-Off
1-On, the phone will perform an auto provisioning process weekly.
Default 0
Web UI Settings > Auto Provision > Weekly
Parameter static.auto_provision.weekly.dayofweek <y0000000000xx>.cfg
Description
It configures the days of the week for the phone to perform the auto provisioning
weekly.
Example:
static.auto_provision.weekly.dayofweek = 01
It means the phone will perform an auto provisioning process every Sunday and
Monday.
Note: It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
Permitted Values
0,1,2,3,4,5,6 or a combination of these digits
0-Sunday
1-Monday
2-Tuesday
3-Wednesday
4-Thursday
5-Friday
6-Saturday
Default 0123456
Web UI Settings > Auto Provision > Day of Week
Parameter
static.auto_provision.weekly.begin_time
static.auto_provision.weekly.end_time
<y0000000000xx>.cfg
Description
It configures the start/end time of the day for the phone to perform auto provisioning
weekly.
Note: It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
Permitted Values Time from 00:00 to 23:59
Default 00:00
Web UI Settings > Auto Provision > Time
[1]If you change this parameter, the phone will reboot to make the change take effect.
Setting Up a Provisioning Server
You can use a provisioning server to configure your phones. A provisioning server allows for flexibility in upgrading,
maintaining and configuring the phone. Configuration files are normally located on this server.
•
Supported Provisioning Protocols