Yealink Teams Series

| Phone Customization | 68
Description
It configures the date format.
The value configured by the parameter “lcl.datetime.date.format” takes precedence over
that configured by this parameter.
Permitted Values
0-WWW MMM DD
1-DD-MMM-YY
2-YYYY-MM-DD
3-DD/MM/YYYY
4-MM/DD/YY
5-DD MMM YYYY
6-WWW DD MMM
Use the following mapping:
“WWW” represents the abbreviation of the week;
“DD” represents a two-digit day;
“MMM” represents the first three letters of the month;
“YYYY” represents a four-digit year, and “YY” represents a two-digit year.
Default 0
Phone UI
> Settings > Device Settings > Time&Date > Time & Date Format > Date Format
Web UI Settings > Time & Date > Date Format
Tones
When the phone is in the dialing interface, it will play a warning tone. You can customize tones or select specialized
tone sets (vary from country to country) to indicate different conditions of the phone. It is not applicable to CP960
Phones.
•
Supported Tones
•
Tones Configuration
Supported Tones
The default tones used on Teams IP Phones are the US tone sets. Available tone sets for the phones:
• Australia
• Austria
• Brazil
• Belgium
• Chile
• China
• Czech
• Czech ETSI
• Denmark
• Finland
• France
• Germany