| Phone Customization | 53
Language Customization
You can customize the language file to display on the phone user interface or web user interface.
You can ask the distributor or Yealink FAE for language packs. You can also obtain the language packs online: http://
support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
Note: The new added language must be supported by the font library on the phone. If the characters in the
custom language file are not supported by the phone, the phone will display “?” instead.
•
Language for Phone Display Customization
•
Language for Web Display Customization
Language for Phone Display Customization
Available languages depend on the language packs currently loaded to the phone. You can also add new languages
(not included in the available language list) available for phone display by loading language packs to the phone.
•
Customizing a Language Pack for Phone Display
•
Custom Language for Phone Display Configuration
Customizing a Language Pack for Phone Display
When you add a new language pack for the phone user interface, the language pack must be formatted as
“X.GUI.name.lang” (X starts from 011, “name” is replaced with the language name). If the language name is the
same as the existing one, the existing language pack will be overridden by the new uploaded one. We recommend that
the filename of the new language pack should not be the same as the existing one.
Note: To modify language file, do not rename the language pack.
1.
Open the desired language template file (for example, 000.GUI.English.lang).
2.
Modify the characters within the double quotation marks on the right of the equal sign.Do not modify the item on
the left of equal sign.
The following shows a portion of the language pack “000.GUI.English.lang” for the phone user interface:
To Next Page
Loading...
Need help?
General
