| Phone Provisioning | 38
Note:
The provisioning priority mechanism takes effect only if “static.auto_provision.custom.protect” is set to 1.
For more information on this parameter, refer to MAC-local CFG File Configuration.
Static parameters have no priority. They take effect no matter what method (web user interface or phone user
interface or configuration files) you are using for provisioning.
Static parameters are the parameters that start with a prefix “static.”, for example, the parameters associated
with auto provisioning/network/syslog and internal settings (the temporary configurations to be used for
program running).
Related information
Provisioning Phone on the Microsoft Teams & Skype for Business Admin Center
Manual Provisioning
This method enables you to perform configuration changes on a per-phone basis.
•
Web User Interface Access
•
Phone User Interface
Web User Interface Access
When configuring the phones via web user interface, you are required to have a user name and password for access.
For a user, the default user name and password are “user” (case-sensitive). For an administrator, the default user name
and password are “admin” (case-sensitive).
•
Accessing the Web User Interface
•
Web Server Type Configuration
•
Importing CFG Configuration Files to Phone
•
Exporting CFG Configuration Files from Phone
Accessing the Web User Interface
Procedure
1.
Find the phone IP address.
2.
Tap > Settings > Device Settings > About on the phone.
3.
Enter the IP address in the address bar of a web browser on your PC.
To Next Page
Loading...
Need help?
General
