Yealink Teams Series

| Hybrid Mode | 89
Default 5060
Web UI Account > Register > SIP Server Y > Port
Parameter account.X.sip_server.Y.expires
[1][2]
<MAC>.cfg
Description It configures the registration expiration time (in seconds) of SIP server Y.
Permitted Values Integer from 30 to 2147483647
Default 3600
Web UI Account > Register > SIP Server Y > Server Expires
Parameter account.X.sip_server.Y.retry_counts
[1][2]
<MAC>.cfg
Description It configures the retry times for the phone to resend requests when the SIP server Y is unavailable
or there is no response from the SIP server Y.
Permitted Values
Integer from 0 to 20
Default 3
Web UI Account > Register > SIP Server Y > Server Retry Counts
Parameter account.X.sip_server.Y.transport_type
[1][2]
<MAC>.cfg
Description It configures the type of transport protocol for a specific account.
Permitted Values
0-UDP
1-TCP
2-TLS
3-DNS-NAPTR, if no server port is given, the phone performs the DNS NAPTR and SRV
queries for the service type and port.
Default 0
Web UI Account > Register > SIP Server Y > Transport
[1] X is the account ID. For T58A/T56A, X=1-16; for CP960, X=1.
[2] Y is the server ID. Y=1-2.
Account Codec Configuration
In survivability app mode, you can enable codecs for a specific account.
The following table lists the parameters you can use to configure account codec.
Parameter account.X.codec.<payload_type>.enable
[1]
<MAC>.cfg