| Phone Customization | 62
Description
It enables or disables the phone to update time with the offset time offered by the
DHCP server.
Note: It is only available to offset time from Greenwich Mean Time GMT 0.
Permitted Values
0-Disabled
1-Enabled
Default 0
Phone UI
> Settings > Device Settings > Time&Date > DHCP Time > DHCP Time
Web UI Settings > Time & Date > DHCP Time
Parameter local_time.ntp_server1 <MAC>.cfg
Description
It configures the IP address or the domain name of the NTP server 1.
The phone will obtain the current time and date from the NTP server 1.
Permitted Values IP address or domain name
Default cn.pool.ntp.org
Phone UI
> Settings > Device Settings > Time&Date > General > NTP Server1
Web UI Settings > Time & Date > Primary Server
Parameter local_time.ntp_server2 <MAC>.cfg
Description
It configures the IP address or the domain name of the NTP server 2.
If the NTP server 1 is not configured (configured by the parameter
“local_time.ntp_server1”) or cannot be accessed, the phone will request the time and
date from the NTP server 2.
Permitted Values IP address or domain name
Default pool.ntp.org
Phone UI
> Settings > Device Settings > Time&Date > General > NTP Server2
Web UI Settings > Time&Date > Secondary Server
Parameter local_time.interval <MAC>.cfg
Description It configures the interval (in seconds) at which the phone updates time and date from
the NTP server.
Permitted Values Integer from 15 to 86400
Default 1000
Web UI Settings > Time & Date > Update Interval (15~86400s)
Parameter local_time.time_zone <MAC>.cfg
Description It configures the interval (in seconds) at which the phone updates time and date from
the NTP server.
Permitted Values
-12 to +14
For available time zones, refer to Time Zone.
Default +8
To Next Page
Loading...
Need help?
General
