| Phone Network | 27
Description It enables or disables the PC port.
Note: It is not applicable to CP960 Phones.
Permitted Values
0-Disabled
1-Auto Negotiation
Default 1
Web UI Network > PC Port > PC Port Active
Parameter static.network.internet_port.speed_duplex
[1]
<y0000000000xx>.cfg
Description It configures the transmission method of the Internet port.
Note: You can set the transmission speed to 1000Mbps/Auto Negotiation to transmit
in 1000Mbps if the phone is connected to the switch which supports Gigabit Ethernet.
We recommend that you do not change this parameter.
Permitted Values
0-Auto Negotiation
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps (not applicable to CP960 phones)
Default 0
Web UI Network > Advanced > Port Link > WAN Port Link
Parameter static.network.pc_port.speed_duplex
[1]
<y0000000000xx>.cfg
Description
It configures the transmission method of the PC port.
Note: You can set the transmission speed to 1000Mbps/Auto Negotiation to transmit
in 1000Mbps if the phone is connected to the switch which supports Gigabit Ethernet.
We recommend that you do not change this parameter. It is not applicable to CP960
Phones.
Permitted Values
0-Auto Negotiation
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps
Default 0
Web UI Network > AdvancedPort Link > PC Port Link
Parameter static.network.vlan.pc_port_mode
[1]
<y0000000000xx>.cfg