| Phone Network | 29
Web UI Network > Advanced > 802.1x > 802.1x Mode
Phone UI
> Settings > Device Settings > Network(Admin only, default password:
admin) > 802.1x > 802.1x Mode
Parameter static.network.802_1x.identity
[1]
<y0000000000xx>.cfg
Description
It configures the user name for 802.1x authentication.
Example:
static.network.802_1x.identity = yealink
Note: It works only if “static.network.802_1x.mode” is set to 1, 2, 3, 4, 5, 6 or 7.
Permitted Values String within 32 characters
Default Blank
Web UI Network > Advanced > 802.1x > Identity
Phone UI
> Settings > Device Settings > Network(Admin only, default password:
admin) > 802.1x > Identity
Parameter static.network.802_1x.md5_password
[1]
<y0000000000xx>.cfg
Description
It configures the password for 802.1x authentication.
Example:
static.network.802_1x.md5_password = admin123
Note: It works only if “static.network.802_1x.mode” is set to 1, 3, 4, 5, 6 or 7.
Permitted Values String within 32 characters
Default Blank
Web UI Network > Advanced > 802.1x > MD5 Password
Phone UI
> Settings > Device Settings > Network(Admin only, default password:
admin) > 802.1x > MD5 Password
Permitted Values URL within 511 characters
Default Blank
Web UI Network > Advanced > 802.1x > CA Certificates
Parameter static.network.802_1x.client_cert_url
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the device certificate.
Example:
static.network.802_1x.client_cert_url = http://192.168.1.10/client.pem
Note: It works only if “static.network.802_1x.mode” is set to 2 (EAP-TLS). The
format of the certificate must be *.pem.
Permitted Values URL within 511 characters
Default Blank
Web UI Network > Advanced > 802.1x > Device Certificates
[1]If you change this parameter, the phone will reboot to make the change take effect.
To Next Page
Loading...
Need help?
General
