EasyManuals Logo

Yealink Teams Series User Manual

Yealink Teams Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
| Phone Customization | 71
Note: For VP59 Teams phones, if you disable the power saving feature, the phone will automatically enter
power-saving mode toprotect the screen when the phone is inactive for 72 hours. Image persistence may be
caused on LCD if power saving is disabled.
The following table lists the parameters you can use to configure power saving.
Parameter features.power_saving.intelligent_mode <y0000000000xx>.cfg
Description
It enables or disables the power saving intelligent mode.
Permitted Values
0-Disabled, the phone stays in power-saving mode even if the office hour arrives
the next day.
1-Enabled, the phone will automatically identify the office hour and exit power-
saving mode once the office hour arrives the next day.
Default 1
Parameter features.power_saving.enable <y0000000000xx>.cfg
Description
It enables or disables the power saving feature.
Note: It is only applicable to VP59 phones.
Permitted Values 0-Disabled, the phone automatically enters the power-saving mode to protect
the screen when the phone is inactive for 72 hours. Image persistence may be
caused on LCD.
1-Enabled
Default 1
Web UI Settings > Power Saving > Power Saving
Parameters features.power_saving.office_hour.idle_timeout <y0000000000xx>.cfg
Description
It configures the time (in minutes) that the phone waits in the idle state before
phone enters power-saving mode during the office hours.
Example:
features.power_saving.office_hour.idle_timeout = 600
The phone will enter power-saving mode when it has been inactivated for 600
minutes (10 hour) during the office hours.
Permitted Values
Integer from 1 to 960
Default 120
Web UI Settings > Power Saving > Office Hour Idle TimeOut
Parameters features.power_saving.off_hour.idle_timeout <y0000000000xx>.cfg
Description
It configures the time (in minutes) that the phone waits in the idle state before IP
phone enter power-saving mode during the non-office hours.
Example:
features.power_saving.off_hour.idle_timeout = 5
The IP phone will enter power-saving mode when it has been inactivated for 5
minutes during the non-office hours.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink Teams Series and is the answer not in the manual?

Yealink Teams Series Specifications

General IconGeneral
DisplayColor touchscreen
Audio CodecsOpus, G.722, G.711
ConnectivityEthernet, Bluetooth (select models), Wi-Fi (select models)
Power over Ethernet (PoE)802.3af
USB PortsYes
Headset SupportBluetooth (select models)
Teams ButtonYes (dedicated button for Microsoft Teams)
IntegrationMicrosoft Teams
CameraVaries by model
Supported ProtocolsSIP
Network InterfacesDual Gigabit Ethernet ports
Power AdapterOptional
MountingDesk mount, wall mount
CompatibilityMicrosoft Teams
ResolutionVaries by model (e.g., 800 x 480 pixels)

Related product manuals