| Troubleshooting Methods | 99
Permitted Values
IP address or domain name
Default Blank
Web UI Settings > Configuration > Syslog > Syslog Server
Parameter static.syslog.server_port <y0000000000xx>.cfg
Description
It configures the port of the syslog server.
Example:
static.syslog.port = 515
Permitted Values Integer from 1 to 65535
Default 514
Web UI Settings > Configuration > Syslog > Syslog Server > Port
Parameter static.syslog.transport_type <y0000000000xx>.cfg
Description It configures the transport protocol that the phone uses when uploading log messages
to the syslog server.
Permitted Values
0-UDP
1-TCP
2-TLS
Default 0
Web UI Settings > Configuration > Syslog > Syslog Transport Type
Parameter static.syslog.level <y0000000000xx>.cfg
Description
It configures the lowest level of syslog information that displays in the syslog.
When you choose a log level, it includes all events of an equal or higher severity
level and excludes events of a lower severity level. The logging level you choose
determines the lowest severity of events to log.
Permitted Values
0-Emergency: system is unusable
1-Alert: action must be taken immediately
2-Critical: critical conditions
3-Critical: error conditions
4-Warning: warning conditions
5-Warning: normal but significant condition
6-Informational: informational messages
Default 6
Web UI Settings > Configuration > Syslog > Syslog Level
Parameter static.syslog.facility <y0000000000xx>.cfg
Description
It configures the facility that generates the log messages.
Note: For more information, refer to RFC 3164.
To Next Page
Loading...
Need help?
General
