| Configuring Account Settings | 106
Parameter Description Configuration Method
Platform Type Select Zoom.
Web user interface
Endpoint
CTP20/CTP18
Server/
Server Host
The IP address or the domain
name of the Zoom server.
Default: zoomcrc.com
Web user interface
Endpoint
CTP20/CTP18
Transport
Specify the transport protocol for
transmitting the SIP signaling.
The supported protocols are as
follows:
• UDP—it provides the
best transmission for SIP
signaling.
• TCP—it provides a reliable
transmission for SIP
signaling.
• TLS—it provides a safe
transmission for SIP
signaling. TLS is available
only when the device is
registered on a SIP server
that supports TLS.
• DNS-NAPTR—the device
performs the DNS NAPTR
and SRV request to find the
service type and the port if no
server port is given.
Default: TCP.
Web user interface
Server Expires
The registration timeout (in
seconds) of the device.
After the timeout, the device will
send the registration request to
the server again.
Default: 3600 seconds.
Web user interface
Keep Alive Interval
Configure the interval (in
seconds) that the device sends
keep-alive messages to the SIP
server, so that the SIP server
can remain connected to the
device.
Default: 30 seconds.
Web user interface
Related tasks
Switching System Modes of Third Generation Video Conferencing System
To Next Page
Loading...
Need help?
General
Weight and Dimensions
