| Configuring Call Settings | 211
Priority of Call Types
In the dialing screen, if you select the call type automatically, the system will select a call type according to
the following priority:
• If you dial an account, the priority is: Cloud platform>H.323 account>SIP account>PSTN account.
• If you dial an IP address, the priority is: H.323 IP Call>SIP IP Call.
Configuring the Account Polling
Procedure
1. On your web user interface, go to Setting > Call Features > Outbound Call Settings.
For MeetingEye 600/MeetingEye 400/PVT960/PVT940, on the web user interface, go to Account >
Account Settings.
2. Configure and save the following settings:
Parameter Description Configuration Method
Account Polling
Enable or disable the account
polling on the system.
• Off—the system dials a
number by using the call type
with the highest priority. If
you disable this feature, you
cannot place the call.
• On—the system tries each
call type in order to dial a
number.
Default: On.
Web user interface
Related tasks
Placing a Call by Entering a Number
Selecting Conference Call Preferences on CTP20/CTP218
The conference call options include Start Conference, Dial, Directory, and History, and you can initiate
a conference from any call option. The meeting call preferences determines the call interface that is first
entered when the meeting is initiated.
Procedure
1. On your web user interface, go to Setting > Touch Panel > First Conference Call.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
