EasyManuals Logo

Yealink WPP20 Administrator's Guide

Yealink WPP20
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
| Configuring Network Settings | 80
Procedure
1. Do one of the following:
• On your web user interface, go to Network > LAN Configuration > IPv4/IPv6.
• On your VCS: go to More > Settings > Network Setting > Wired Network > IPv4/IPv6.
For VP59, tap > Settings > Network Setting > Wired Network > IPv4/IPv6.
•
On your CTP20/CTP18, tap > Settings > Network Setting > Host Network > Network > Wired
Network > IPv4/IPv6.
2. Configure and save the following settings:
Parameter Description Configuration Method
Static DNS
Enable or disable DNS feature.
Default: Off.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Primary DNS/Pri.DNS
Configure the primary DNS
server assigned to the system.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Secondary DNS/Sec.DNS
Configure the secondary DNS
server assigned to the system.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Related information
Configuring IPv4 or IPv6
DHCP Options
The DHCP information with labels carries with the corresponding network and other control information.
The information is called option. After connected to the network, the device will broadcast the DISCOVER
request which carries the DHCP options of the network information. The DHCP server will replay the
corresponding option after receiving the request.
Note:
For more information on DHCP options, refer to RFC 2131 or RFC 2132.
• Supported DHCP Option of IPv4
• DHCP Option 42, Option 2
• DHCP Option 12
Supported DHCP Option of IPv4
The following table lists the DHCP options supported by Yealink VCS in IPv4 network.

Table of Contents

Other manuals for Yealink WPP20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink WPP20 and is the answer not in the manual?

Yealink WPP20 Specifications

General IconGeneral
InterfaceWLAN
USB version2.0
Connectivity technologyWireless
Wi-FiYes
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Security algorithmsWPA-PSK, WPA2-PSK
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11n
Maximum data transfer rate- Mbit/s
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Output voltage5 V
Power consumption (typical)2.5 W
InternalNo
Component forLaptop
Product colorGray
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth183.2 mm
Width26 mm
Height9 mm

Related product manuals