EasyManuals Logo

Yealink WPP20 Administrator's Guide

Yealink WPP20
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
| Configuring Video Settings | 169
2. Configure and save the following settings:
Parameter Description Configuration Method
View Switching Interval
Configure the view switching
interval.
Note: the default value is 30
seconds.
The video images will be
switched automatically every 30
seconds.
Web user interface
View Round
Configure the number of video
images to be switched at a time.
Note: the default value is 1.
Valid value: 1 - 7.
Web user interface
Full Screen Round Switches all video images
(except for the active speaker
and the content) at a time.
Web user interface
Configuring Preview Local
If there is no local screen in the current layout (such as remote full screen or split mode does not display
local), the local thumbnail image cannot be viewed when adjusting the local camera, so the camera cannot
be accurately adjusted. If you enable preview local, when there is no local screen in the current layout,
the local small window is superimposed in the lower right corner of the screen when you adjust the local
camera. After no PTZ operation within five seconds, the local thumbnail image disappears.
Procedure
1. On your web user interface, go to Setting > Display > Layout.
2. Configure and save the following settings:
Parameter Description Configuration Method
Preview Local
Enable or disable to view
the local thumbnail image by
adjusting camera when there is
no local screen in the current
layout.
• On-You can view the local
thumbnail image when you
adjust the camera.
• Off-You can not view the
local thumbnail image when
you adjust the camera.
Default: On.
Web user interface

Table of Contents

Other manuals for Yealink WPP20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink WPP20 and is the answer not in the manual?

Yealink WPP20 Specifications

General IconGeneral
InterfaceWLAN
USB version2.0
Connectivity technologyWireless
Wi-FiYes
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Security algorithmsWPA-PSK, WPA2-PSK
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11n
Maximum data transfer rate- Mbit/s
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Output voltage5 V
Power consumption (typical)2.5 W
InternalNo
Component forLaptop
Product colorGray
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth183.2 mm
Width26 mm
Height9 mm

Related product manuals