| Configuring the Security Features | 249
2. Configure and save the following settings:
Parameter Description Configuration Method
Abnormal Call Answering
Specify the account type
for answering abnormal SIP
incoming calls.
The supported types are as
follows:
• Disabled—reject the
abnormal SIP incoming calls.
• Account Answer—use the
registered SIP account to
answer the abnormal SIP
incoming calls.
• IP Call Answer—use IP
address to answer the
abnormal SIP incoming calls.
Default: IP Call Answer.
Web user interface
Configuring the Safe Mode Call
The safe mode call feature is used to verify whether the incoming H.323 call is coming from an H.323
endpoint.
Procedure
1. On your web user interface, go to Setting > Inbound Call Settings.
2. Configure and save the following settings:
Parameter Description Configuration Method
Safe Mode Call
Enable or disable the safe mode
call feature.
The supported types are as
follows:
• Off—answer incoming
H.323 calls directly without
validation.
• On—verify whether the
incoming H.323 call is
coming from an H.323
endpoint. If it is, the system
will answer it. If not, the
incoming call will be rejected.
Default: Disabled.
Web user interface
System Integrated with Control Systems
Yealink video conferencing system provides API for third-party control system to integrate with. Therefore,
third-party control system can control Yealink video conferencing system via API. This feature is not
applicable to VP59.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
