| Configuring Call Settings | 213
Parameter Description Configuration Method
External
Enable or disable to display the external
contact list.
Note: It is enabled by default. It can be
configured only when logging in to a YMS or
Yealink Cloud account.
Web user interface
Local directory
Enable or disable to display the local contact
list.
Default: On.
Web user interface
Conference Contacts
Enable or disable to display the conference
contact list.
Default: On.
Web user interface
LDAP
Enable or disable to display the LDAP list.
Note: It is enabled by default.
Web user interface
Tab Default Configure the list of contacts that is displayed
by default when you enter the contact
interface.
Note: If you have logged in to a YMS or a
Yealink Cloud account, the default value is
Enterprise. Otherwise, the default value is
Local.
Web user interface
Configuring the Feature of Invitation Before Meeting
By default, you can directly initiate a Meet Now conference without any participants on third generation
VCS devices. If you want to invite participants before initiating a conference, you can enable is this feature.
Procedure
1. On your web user interface, go to Setting > Call Features > In-Call Settings.
2. Configure and save the following settings:
Parameter Description Configuration Method
Invitation Before Meeting
Enable or disable this feature.
Default: Off.
Web user interface
To Next Page
Loading...
Need help?
General
Weight and Dimensions
