EasyManuals Logo

Yealink WPP20 Administrator's Guide

Yealink WPP20
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #136 background imageLoading...
Page #136 background image
| Basic Settings | 136
2. Configure and save the following settings:
Parameter Description Configuration Method
USB Enable
Enable or disable the USB
feature.
Note: the default value is On.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Configuring the Screenshot
You can take screenshots. This feature is not applicable to VP59. (This feature is only applicable to third
generation VCS devices running in Standard mode)
Before you begin
If you want to save the screenshot to USB flash drive, make sure a USB flash drive is available.
About this task
This feature is not applicable to the third generation VCS devices running in Yealink Cloud system mode.
Procedure
1. On your web user interface, go to Setting > USB Config.
2. Configure and save the following settings:
Parameter Description Configuration Method
Taking Screenshots
Enable or disable to capture the
screenshot by using the remote
control.
• On
• Off
Default: On.
Web user interface
Related tasks
Configuring USB Storage
Configuring Local Storage
Configuring to Automatically Upload Screenshots to the YMS
If you enable this feature, the endpoint can automatically upload the screenshots you take or save on the
USB flash drive/local storage to the YMS, which is convenient for you to view and manage the screenshots
on the YMS.
Before you begin
Make sure the Screenshot feature is enabled. If you want to save the screenshot to USB flash drive, make
sure a USB flash drive is available.

Table of Contents

Other manuals for Yealink WPP20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink WPP20 and is the answer not in the manual?

Yealink WPP20 Specifications

General IconGeneral
InterfaceWLAN
USB version2.0
Connectivity technologyWireless
Wi-FiYes
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Security algorithmsWPA-PSK, WPA2-PSK
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11n
Maximum data transfer rate- Mbit/s
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Output voltage5 V
Power consumption (typical)2.5 W
InternalNo
Component forLaptop
Product colorGray
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth183.2 mm
Width26 mm
Height9 mm

Related product manuals