EasyManuals Logo

Yealink WPP20 Administrator's Guide

Yealink WPP20
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #201 background imageLoading...
Page #201 background image
| Configuring Camera Settings | 201
2. Configure and save the following settings:
Parameter Description Configuration Method
FECC (H.323)
Enable or disable FECC(H.323).
If you enable FECC (H.323)
protocol, the remote can control
the near camera.
Default: On.
Web user interface
Configuring FECC (SIP) Protocol
When using SIP account, SIP IP call, or logging in to Zoom, Pexip, BlueJeans, Videxio, or a custom third-
party platform, you can enable FECC (SIP) control for SIP calls. To control the far-site camera, the call
parties should enable this protocol simultaneously.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > Video Conference Platform > Platform Type >
Zoom/Pexip/BlueJeans/Videxio/Custom.
• On your web user interface, go to Account > SIP Account/SIP IP Call.
2. Configure and save the following settings:
Parameter Description Configuration Method
FECC (SIP)
Enable or disable the FECC
(SIP) protocol for the far site to
control the near camera.
Note:
For Zoom/Pexip/BlueJeans/
EasyMeet/Videxio/Custom and
SIP IP call, BFCP is enabled by
default.
For SIP account, BFCP is
disabled by default.
Web user interface
Configuring the Far Site to Control the Near Camera
You can enable this feature to allow the remote to control your local camera, so that the image captured by
the local camera can be displayed properly on the remote monitor. This feature is not applicable to VP59.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Call Features > In-Call Settings.
• On your VCS, go to More > Settings > Basic > Camera.
•
On your CTP20/CTP18, tap > Settings > Basic > Camera.

Table of Contents

Other manuals for Yealink WPP20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink WPP20 and is the answer not in the manual?

Yealink WPP20 Specifications

General IconGeneral
InterfaceWLAN
USB version2.0
Connectivity technologyWireless
Wi-FiYes
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Security algorithmsWPA-PSK, WPA2-PSK
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11n
Maximum data transfer rate- Mbit/s
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Output voltage5 V
Power consumption (typical)2.5 W
InternalNo
Component forLaptop
Product colorGray
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth183.2 mm
Width26 mm
Height9 mm

Related product manuals