| Configuring Call Settings | 208
• Account Polling
• Selecting Conference Call Preferences on CTP20/CTP218
• Setting the Contact Display Label CTP20/CTP18
• Configuring the Feature of Invitation Before Meeting
• Configuring Additional Audio Call
• Selecting the Multi-Party Resources
• Configuring Call Match
• Dial Plan
• Search Source List in Dialing
• Configuring SIP IP Call by Proxy
• Configuring Ringback Timeout
• Configuring the Auto Refuse Timeout
• Auto Answer
• Muting Auto-Answered Calls
• Muting Auto-Dialed Calls
• DND (Do Not Disturb)
• Enabling Fast Audio Call for CP960
Setting Available Calling Platforms
By default, you cannot select the call type when making a call as the VCS devices will pick the
corresponding platform according to the priority of call types. Therefore, you can enable the feature of
Select Platform In Dial, which allows you to select the desired platform to make an outgoing call.
Procedure
1. On your web user interface, go to Account > Account Settings.
2. Configure and save the following settings:
Parameter Description Configuration Method
Select Platform In Dial
Enable or disable this feature.
Default: disabled.
Web user interface
Related information
Priority of Call Types
Selecting a Call Protocol
The system supports SIP and H.323 protocols for the incoming and the outgoing calls.
About this task
This feature is not applicable to the third generation VCS devices running in Yealink Cloud system mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
