Yealink WPP20 Administrator's Guide

| Configuring Video Settings | 170
Changing the Video Input Source
The system supports the video input sources both from the camera and the PC. If you do not share the
contents during the call, the video input source is camera by default; if not, switch the video input source
to Camera+PC to zoom in the screen You can change the video input source and select the content to be
displayed on the screen. This feature is not applicable to VP59.
Procedure
Do one of the following during a call:
• On your web user interface, go to Home > Input Selection.
• On your remote control, press the OK key to open Talk Menu and go to More > Input Selection.
• If you select PC, the remote video image is displayed in a large window, and the PC content is
displayed in a small window (Picture-in-Picture mode).
• If you select Camera+PC, the PC content is displayed in a large window, and other video images are
displayed in small windows.
• If you select Camera, the remote video image is displayed in a large window, and the local video
image is displayed in a small window (Picture-in-Picture mode).
Configuring HDMI Extended Display by VP59
After you enable the HDMI feature on VP59, if you connect a monitor to the phone during a video call, the
video images of the remote party and the shared content are displayed on the monitor, and the call control
page is displayed on phone screen.
Procedure
1.
On VP59, tap > Settings > Basic > General > HDMI.
2. Configure and save the following settings:
Parameter Description Configuration Method
HDMI
Enable or disable the HDMI
feature.
Default: On.
VP59
Specifying Content to the Secondary Screen
When you connect dual display screen, you can specify the content to be displayed on the secondary
monitor. This feature is not applicable to MeetingEye 600/MeetingEye 400/PVT960/PVT940/VC200/
VC200-E/VP59. For more information about the video image displayed on the two displays when you use
MeetingEye 600/PVT960, refer to Setting the Default Layout for Dual Single Screen.
Procedure
1. On your web user interface, go to Setting > Video > Output For Display 2.

Yealink WPP20 Specifications

General

Interface	WLAN
USB version	2.0
Connectivity technology	Wireless
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
Security algorithms	WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11ac, IEEE 802.11b, IEEE 802.11n
Maximum data transfer rate	- Mbit/s
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Output voltage	5 V
Power consumption (typical)	2.5 W
Internal	No
Component for	Laptop
Product color	Gray
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	183.2 mm
Width	26 mm
Height	9 mm