Yealink WPP20 Administrator's Guide

| Configuring Video Settings | 171
2. Configure and save the following settings:
Parameter Description Configuration Method
Output in IDLE
Specify the content to be displayed
on the secondary monitor when the
system is idle.
• Auto—The secondary monitor
displays the content in this
priority: PC>Active Camera>VCS
Camera>Camera N.
• PC—The secondary monitor
displays the PC content.
• Active Camera—The secondary
monitor displays the video images
from the currently active camera.
If you change the active camera,
the video image on the secondary
monitors also changes. For
example, if you use the VC880/
VC800/PVT980 camera as the
active camera first, and then
you select the preset of camera
1 (The Preset Synchronize
With Active Camera feature is
enabled, and the active camera
becomes camera 1 at this time),
the secondary monitor displays the
image of camera 1.
• VCS Camera (it is not applicable
to VC880)—The secondary
monitor displays the video images
from the camera built-in VCS.
• Camera N—The secondary
monitor displays the video images
from the connected camera N.
Note: the default value is Auto.
Web user interface

Yealink WPP20 Specifications

General

Interface	WLAN
USB version	2.0
Connectivity technology	Wireless
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
Security algorithms	WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11ac, IEEE 802.11b, IEEE 802.11n
Maximum data transfer rate	- Mbit/s
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Output voltage	5 V
Power consumption (typical)	2.5 W
Internal	No
Component for	Laptop
Product color	Gray
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	183.2 mm
Width	26 mm
Height	9 mm