2-16
SM80B22M02E
３．１．１ Set the existing gyrocompass heading input format
（１）Set the
mode. Then press
ENTER
ENTERENTER
ENTER
key/
Display the current existing format on the data display.
（２）Press the
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key to select the existing Gyrocompass format.
（３）In case of you choose the existing gyrocompass format. Back to（１）item , then Press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode
The part of a....a is displayed setting condition.
Refer the contents to next page.
（４）Press the
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key. Alter the display of the existing format.
After selected the setting mode , Press
ENTER
ENTERENTER
ENTER
key..
To Next Page
Loading...
Need help?
General