YOKOGAWA PT500 User Manual

9-1
SM80B22M02E
Chapter 9 Program version number
Display the current program version number
（１）Select the "
MAINTENANCE 8 … " mode on the data display. Then press ENTER
ENTERENTER
ENTER key.
Identification of
ECDIS
Contents
0 Tracking interface with other maker’s ECDIS
1 TCS IF for JRC ECDIS
2 TCS IF for FURUNO ECDIS
3 Interface with MITSUMISHI Super Bridge
4 TCS IF for TRANSAS ECDIS
5 Interface with Kelvin Huge ECDIS
6 Interface with TOKIMEC ECDIS
Example of indication
Auto steering unit
ID, Version and
Revision of Autopilot
ID, Version and
Revision of TCS
Application
PB343 CR155J23 TCS-1A01 For JRC TCS IF
PB343 CR155K10 TCS-2A01 For FURUNO TCS IF
PB343 CR155K10 TCS-4A01 For TRANSAS TCS IF
（２）Press ENTER
ENTERENTER
ENTER key. Back to the maintenance item mode.
Version TCS
-
xa##
'YY/MM/DD xxxa##
Version No．Ａ～Ｚ
Date of master ROM
Month of master ROM
Year of master ROM
Revision No．01～99
Maste
r ROM ID
TCS software version
TCS software versionTCS software version
TCS software version
x：Identification of ECDIS
a：Version No. A ～ Z
##：Revision No.01 ～ 99
AUTOPILOT
AUTOPILOTAUTOPILOT
AUTOPILOT
software version
software version software version
software version
This
ThisThis
This information
informationinformation
information appear
appear appear
appears
ss
s
only when TCS interface
only when TCS interface only when TCS interface
only when TCS interface
protocol has been set.
protocol has been set.protocol has been set.
protocol has been set.

YOKOGAWA PT500 Specifications

General

Brand	YOKOGAWA
Model	PT500
Category	Autopilot System
Language	English