YOKOGAWA PT500 - Software Setting of the Set Course Input Format

2-29
SM80B22M02E
３．３．４ Software setting of the Set course input format
（１）Set the
key. Then press ENTER
ENTERENTER
ENTER key.
The data display become under setting mode
（２）Press the △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key to select the setting item.
（３）In case of you choose the existing format. Back to（１）item , then Press ENTER
ENTERENTER
ENTER key.
The data display become under setting mode
（４）Press the △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key. Alter the display of the existing format.
After selected the setting mode , Press ENTER
ENTERENTER
ENTER key..
MAINTENANCE 1
…
I/F SET-UP
I/F SET
-
UP
…
SOFTWARE SET
I/F SOFT SET
-
UP
…
PORT=INS/GPS INP
I/F SOFT SET
-
UP
…
SET COURSE
SETCRS
INP SOFT
…
FORMAT = EXIST
SETCRS INP SOFT
…
[PREV]
SETCRS INP SOFT
…
[TOP]
SETCRS INP SOFT
…
FORMAT = EXIST
SETCRS INP SOFT
FORMAT < aaaaa