2-23
SM80B22M02E
３．２ Software setting of the Auxiliary compass input
（１）Set the key.
Then press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode
（２）Press the
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key to select the setting item.
（３）In case of you choose the existing Aux. compass format. Back to（１）item , then Press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode
（４）Press the
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key. Alter the display “
NONE
⇔
EXIST
⇔
NEW
⇔
NONE”
After selected the setting mode , Press
ENTER
ENTERENTER
ENTER
key..
EXIST
and
NEW
setting item is the same as Gyrocompass software setting
Refer to 3.1 Soft ware setting of the Gyrocompass setting input .
To Next Page
Loading...
Need help?
General