6-1
SM80B22M02E
Chapter 6 Actual rudder angle output
Output the DAC value based on rudder order
The actual control routine is bypassed under this operation.
(1)
Select the "
MAINTENANCE 5 …
" mode on the data display. Then press
ENTER
ENTERENTER
ENTER
key.
①
(2)
Press
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key to alter the item
①⇔②⇔①
①
②
(3)
Select the RDA OUT , then press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode.
(4)
Press
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key ,the data increase and decrease.
Press
ENTER
ENTERENTER
ENTER
key after setting the rudder value.
Then auto steering unit outputs the DAC value.