2-26
SM80B22M02E
3.3.2 Software setting of the XTE existing format
Set the NMEA0183 format of XTE (Cross track error)
(1)Set the
key. Then press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode
(2)Press the
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key to select the setting item.
In case of you choose the existing format. Back to(1)item , then Press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode
The part of a....a is displayed setting condition.
Refer the contents to next page.
(4)Press the
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key. Alter the display of the existing format.
After selected the setting mode , Press
ENTER
ENTERENTER
ENTER
key..