YOKOGAWA PT500 User Manual

2-1
SM80B22M02E
Chapter 2 I/F SET-UP
Set the protocol of the each input and output serial ports for corresponding with each equipment.
Setting items is as follows.
ＮＯＴＥ
In case of you changed
In case of you changed In case of you changed
In case of you changed setting item, please carry out the settlement of
setting item, please carry out the settlement of setting item, please carry out the settlement of
setting item, please carry out the settlement of ③
③③
③ I/F SET
I/F SET I/F SET
I/F SET-
--
-UP
UPUP
UP.
..
.
① Hardware setting（Set the Protocol）
② Software setting （Set the input and output condition）
③ Settlement of Ｉ／Ｆ set-up
１． Select the I/F set-up data
(1) Press the ENTER
ENTERENTER
ENTER key after displayed "
MAINTENANCE 1 … "on the data display.
The data display is displayed I/F SET-UP mode.
(2) Press △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key to change the item.
①⇔②⇔③⇔④⇔①
①
Set the protocol of each setting port
②
Set the input /output condition of each setting port
③
Settlement of the data inputs
④
Press ENTER
ENTERENTER
ENTER key after selected the item. The function of the item becomes valid mode.
Please refer to the tree of I/F SET-UP
I/F SET
-
UP
…
HARDWARE SET
I/F SET
-
UP
…
SOFTWARE SET
I/F SET
-
UP
…
SET-UP DATA FIX
I/F SET
-
UP
…
<EXIT>

YOKOGAWA PT500 Specifications

General

Brand	YOKOGAWA
Model	PT500
Category	Autopilot System
Language	English