YOKOGAWA PT500 - Chapter 7 Course deviation output

7-1
SM80B22M02E
Chapter 7 Course deviation output
Output the DAC value based on course deviation value
The actual control routine is bypassed under this operation.
（１） Select the " MAINTENANCE 6 … " mode on the data display. Then press ENTER
ENTERENTER
ENTER key.
①
（２） Press △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key to alter the item
①⇔②⇔①
①
②
（３） Select the CDV OUT , then press ENTER
ENTERENTER
ENTER key.
The data display become under setting mode.
（４） Press △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key ,the data increase and decrease.
Press
ENTER
ENTERENTER
ENTER key after setting the course deviation value.
Then auto steering unit outputs the DAC value.
RDA OUT
…
= 0
CDV OUT
…
= 0
CDV OUT
…
= <EXIT>
CDV OUT
< 0
CDV OUT
< P22