YOKOGAWA PT500 User Manual

2-33
SM80B22M02E
３．４ Software setting of the ＩＮＳ／ＧＰＳ output
Set theＩＮＳ／ＧＰＳ output specification
（１）Set the key.
Then press ENTER
ENTERENTER
ENTER key.
The data display become under setting mode
（２）Press the △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key to select the setting item.
（３）In case of you change the input data. Back to（１）item , then Press ENTER
ENTERENTER
ENTER key.
The data display become under setting mode
（４）Press the △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key. Alter the display “
NONE ⇔ EXIST ⇔ NEW ⇔ NONE”
After selected the setting mode , Press ENTER
ENTERENTER
ENTER key..
Note ) NEW setting is not available. It is not able to access to NEW.
I/G OUT SOFT
…
FORMAT = EXIST
I/G OUT SOFT
[PREV]
I/G OUT SOFT
[TOP]
MAINTENANCE 1
…
I/F SET-UP
I/F SET
-
UP
…
SOFTWARE SET
I/F SOFT SET
-
UP
…
PORT=INS/GPS OUT
I/G OUT SOFT
…
FORMAT = EXIST
I/G OUT SOFT
…
FORMAT < EXIST

YOKOGAWA PT500 Specifications

General

Brand	YOKOGAWA
Model	PT500
Category	Autopilot System
Language	English