YOSHIDA XP73 - 2.1 Pre;post-operational Procedures

Directions for Use
52
Operation Manual
2 Directions for Use
* Caution
• To assure the operator’s and patient’s safety, be sure to read through this section prior
to use of the equipment.
2.1 Pre/post-operational Procedures
Pre-operational procedure
Plug the power cable of the equipment into the medical ground outlet.
Check the surrounding area of the equipment 'to make sure' there is no object that interferes
with the X-ray radiography.
Be sure to check the equipment in reference to "7.2 Periodical Checks" P.128 and
"Periodical check list" P.128 prior to use.
Post-operational procedure
After use, turn off (O) the power switch of the equipment and then unplug the power cable
from the medical ground outlet.
* Caution
• Donotplaceanyobjectwithinthemovableeldofthearmunit,otherwisethe
equipment or its surrounding physical proprietaries may be damaged.
NOTE : Be sure to clean up the equipment.
See also : "7.1 Cleaning" P.127