Directions for Use
63
Operation Manual
Seating the patient inside the equipment
Spread the head support open by
holding the base portion and seat the
patient inside the equipment. Instruct
the patient to sit straight up, bite on to
the block and grip the handles.
* Warning
• Do not apply heavy load or shock on to the equipment, e.g. suspending from the chin
rest or handle. Failure to follow this instruction may cause damage to the equipment.
If the sensor comes in contact with the
patient’s shoulder, ask the patient to
grip the handles by crossing their arms
across their chest.
* Caution
• If the proper posture with straighten back is not achieved, the white shadow of the
cervical vertebra may hide the front teeth, resulting in invalid images.
• Do not open or close the head support forcedly without gripping its base, otherwise the
patient may be injured.
• Be sure to press the correct switches, e.g. the Up or Down switch, for positioning,
otherwise, the patient may be injured.
(Panoramic)
(Panoramic)
To Next Page
Loading...