Zapi DUALACE2 NEW GENERATION User Manual

Page 8/169 AFNZPxxx – DUALACE2 NEW GENERATION – User Manual
1 INTRODUCTION
1.1 About this document
1.1.1 Scope of this manual
This manual provides important information about DUALACE2 NEW
GENERATION controller. It presents instructions, guidelines and diagrams
related to installation and maintenance of the controller in an electrically powered
vehicle.
1.1.2 Terms and abbreviations
Application
A customer specific use of Zapi
hardware and software
CAN
Controller Area Network
ESD
Electrostatic discharge
LED
Light Emitting Diode
MCU
Micro Computer Unit
OEM
Original equipment manufacturer
PTC
Positive temperature coefficient
PWM
Pulse width modulation
1.1.3 Manual revision
This revision replaces all previous revisions of this document. Zapi has put much
effort to ensure that this document is complete and accurate at the time of
printing. In accordance with Zapi policy of continuous product improvement, all
data in this document are subject to change or correction without prior notice.
1.1.4 Warnings and notes
In this manual special attention must be paid to information presented in warning
and information notices.
Definitions of warning and information notices are the following.
 This is an information box, useful for anyone working on the installation, or for a
deeper examination of the content.

Zapi DUALACE2 NEW GENERATION Specifications

General

Brand	Zapi
Model	DUALACE2 NEW GENERATION
Category	Controller
Language	English