Zebra DS8178

User Preferences 5 - 23
Hands-Free Decode Aiming Pattern
Parameter # 590 (SSI # F1h 4Eh)
Select Enable Hands-Free Decode Aiming Pattern to project the aiming dot during bar code capture, Disable
Hands-Free Decode Aiming Pattern to turn the aiming dot off, or Enable Hands-Free Decode Aiming Pattern
on PDF to project the aiming dot when the digital scanner detects a 2D bar code.
NOTE With Picklist Mode on page 5-24 enabled, the decode aiming dot flashes even when the Decode Aiming
Pattern is disabled.
Enable Hands-Free Decode Aiming Pattern
(1)
*Disable Hands-Free Decode Aiming Pattern
(0)
Enable Hands-Free Decode Aiming Pattern on PDF
(2)