User Preferences 5 - 25
FIPS Mode
Parameter # 736 (SSI # F1h E0h)
The Federal Information Processing Standard (FIPS) 140-2 is a U.S. government computer security standard used
to accredit cryptographic modules. FIPS enabled scanners and cradles offer this secure mode of operation.
To enable the FIPS mode of operation (disabled by default), scan the Enable FIPS bar code. The scanner attempts
to establish a secure session with the cradle to which it is connected. On success, the scanner lights an amber
LED on every trigger pull to signal that all data will be transmitted over Bluetooth in a secure fashion. On failure, the
scanner will sound transmission failure error message on every attempt to transmit data.
To disable the FIPS mode, scan the Disable FIPS bar code at any time.
Continuous Bar Code Read
Parameter # 649 (SSI # F1h 89h)
Enable this to report every bar code while the trigger is pulled.
Enable FIPS
(1)
* Disable FIPS
(0)
NOTE Zebra strongly recommends enabling Picklist Mode on page 5-24 with this feature. Disabling Picklist
Mode can cause accidental decodes when more than one bar code is in the digital scanner's field of view.
*Disable Continuous Bar Code Read
(0)
Enable Continuous Bar Code Read
(1)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
