Zebra DS8178

8 - 18 DS8178 Digital Scanner Product Reference Guide
Host Character Time-out
Parameter # 239 (SSI # EFh)
This parameter determines the maximum time the digital scanner waits between characters transmitted by the host
before discarding the received data and declaring an error.
To set the delay period (options are 200, 500, 750, or 990 ms), scan one of the following bar codes.
NOTE Other values are available via SSI command.
*Low - 200 ms
(20)
Medium - 500 ms
(50)
High - 750 ms
(75)
Maximum - 990 ms
(99)