Symbologies 12 - 61
Inverse 1D
Parameter # 586 (SSI # F1h 4Ah)
This parameter sets the 1D inverse decoder setting. Options are:
•
Regular Only - the digital scanner decodes regular 1D bar codes only.
•
Inverse Only - the digital scanner decodes inverse 1D bar codes only.
•
Inverse Autodetect - the digital scanner decodes both regular and inverse 1D bar codes.
NOTE The Inverse 1D setting may impact Composite or Inverse Composite decoding. See Composite Inverse
on page 12-67.
*Regular
(0)
Inverse Only
(1)
Inverse Autodetect
(2)
To Next Page
Loading...