Maintenance, Troubleshooting, and Technical Specifications 3 - 13
Cradle Signal Descriptions
Figure 3-1 Cradle Pin-outs
The signal descriptions in Table 3-3 apply to the contacts on the digital scanner and are for reference only.
Table 3-3 Signal Pin-outs
Pin Function
1
PACK+
2
THERM
3
COM1
4
COM2
5
GND
Table 3-4 10 Pin Host Interface Connectors
Pin USB RS-232 Keyboard Wedge RS-485*
1 CABLE_ID CABLE_ID CABLE_ID
2 5VDC 5VDC 5VDC 5VDC
3 GND GND GND GND
4 TXD KBD_CLK IBM_TXD
*Additional RS-485 transceiver hardware located within the
cable.
To Next Page
Loading...