5 - 36 DS8178 Digital Scanner Product Reference Guide
Battery Threshold (continued)
Add an Enter Key
To add an Enter key (carriage return/line feed) after scanned data, scan the following bar code.
To program other prefixes and/or suffixes, see Prefix/Suffix Values on page 5-38.
Transmit Code ID Character
Parameter # 45 (SSI # 2Dh)
A Code ID character identifies the code type of a scanned bar code. This is useful when decoding more than one
code type. In addition to any single character prefix already selected, the Code ID character is inserted between
the prefix and the decoded symbol.
Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID characters,
see Symbol Code Identifiers on page E-1 and Programming Reference on page E-1.
Battery Status Low Warning Threshold
Battery Health Low Warning Threshold
Add Enter Key (Carriage Return/Line Feed)
NOTE If you enable Symbol Code ID Character or AIM Code ID Character, and enable Transmit “No Read”
Message on page 5-41, the digital scanner appends the code ID for Code 39 to the NR message.
To Next Page
Loading...