Symbologies 12 - 75
Aztec Inverse
Parameter # 589 (SSI # F1h 4Dh)
This parameter sets the Aztec inverse decoder setting. Options are:
•
Regular Only - the digital scanner decodes regular Aztec bar codes only.
•
Inverse Only - the digital scanner decodes inverse Aztec bar codes only.
•
Inverse Autodetect - the digital scanner decodes both regular and inverse Aztec bar codes.
Han Xin
Parameter # 1167 (SSI # F8h 04h 8Fh)
To enable or disable Han Xin, scan the appropriate bar code below.
Regular
(0)
Inverse Only
(1)
*Inverse Autodetect
(2)
Enable Han Xin
(1)
*Disable Han Xin
(0)
To Next Page
Loading...