EasyManuals Logo

Zebra DS8178 Product Reference Guide

Zebra DS8178
574 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
User Preferences 5 - 35
Battery Threshold
Scan the appropriate bar code below to select the desired battery status threshold.
Battery Status High Threshold - Parameter #1367
This parameter sets the threshold used to show the Battery Status is High. When the battery status is above
the High Threshold, the battery indicator is green.
Scan this bar code followed by 2 digits from Appendix G, Numeric Bar Codes that correspond to the desired
percentage from 00 to 99. The default is 50%.
Battery Status Medium Threshold - Parameter #1368
This parameter sets the threshold used to show the Battery Status is Medium. When the battery status is
above the Medium Threshold (and below the High Threshold), the Battery indicator is amber. When the
battery status is below the Medium Threshold, the Battery indicator is red.
Scan this bar code followed by 2 digits from Appendix G, Numeric Bar Codes that correspond to the desired
percentage from 00 to 99. The default is 20%.
Battery Status Low Warning Threshold - Parameter #1369
This parameter sets the threshold to indicate Batter Status is Critically Low. When the battery status is below
the Low Warning Threshold, on every trigger release the scanner issues 4 short beeps.
Scan this bar code followed by 2 digits from Appendix G, Numeric Bar Codes that correspond to the desired
percentage from 00 to 99. The default is 10%.
Battery Health Low Warning Threshold - Parameter #1370
This parameter sets the threshold to indicate Battery Health is Low. When the battery health is below the Low
Health Threshold, all battery indication will alternate between Red and the appropriate Battery Status
indication.
Scan this bar code followed by 2 digits from Appendix G, Numeric Bar Codes that correspond to the desired
percentage from 00 to 99. The default is 60%.
NOTE When Battery Health is Low, you should consider replacing the battery.
Battery Status High Threshold
Battery Status Medium Threshold

Table of Contents

Other manuals for Zebra DS8178

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra DS8178 and is the answer not in the manual?

Zebra DS8178 Specifications

General IconGeneral
Product colorBlack
Housing material-
International Protection (IP) codeIP42
TypeHandheld bar code reader
Wavelength617 nm
Sensor typePhoto diode
Scanner type1D/2D
Tilt reading angle0 - 360 °
Pitch reading angle0 - 60 °
Optical sensor resolution1280 pixels
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95 %
PC connectionRS-232/USB
Wireless range100 m
Bluetooth version4.0
Standard interfacesUSB, RS-232, Bluetooth
Connectivity technologyWired & Wireless
Battery life83 h
Battery capacity2500 mAh
Power source typeBattery
Weight and Dimensions IconWeight and Dimensions
Depth107 mm
Width66 mm
Height168 mm
Weight235.3 g

Related product manuals