7 - 8 DS8178 Digital Scanner Product Reference Guide
USB Convert Unknown to Code 39
This option applies only to the IBM Hand-held, IBM Tabletop, and OPOS devices. Scan a bar code below to enable
or disable converting unknown bar code type data to Code 39.
Emulate Keypad
When enabled, all characters are sent as ASCII sequences over the numeric keypad. For example ASCII A would
be sent as “ALT make” 0 6 5 “ALT Break.”
Emulate Keypad with Leading Zero
Enable this to send character sequences sent over the numeric keypad as ISO characters which have a leading
zero. For example ASCII A transmits as “ALT MAKE” 0 0 6 5 “ALT BREAK”.
*Disable Convert Unknown to Code 39
Enable Convert Unknown to Code 39
Disable Keypad Emulation
*Enable Keypad Emulation
Disable Keypad Emulation with Leading Zero
*Enable Keypad Emulation with Leading Zero
To Next Page
Loading...