Zebra DS8178 Product Reference Guide

4 - 14 DS8178 Digital Scanner Product Reference Guide
Link Supervision Timeout
Parameter # 1698 (SSI # F8h 06h A2h)
Link supervision timeout controls how quickly the scanner senses that the Bluetooth radio lost connection to the
remote device. A lower value helps prevent data loss at the edge of the operating range while a larger value helps
prevent disconnects due to the remote device not responding in time. If you are experiencing occasional
disconnects and the scanner is able to reconnect, increase the link supervision timeout value.
NOTE The scanner only controls Link Supervision Timeout in Master Mode.
.5 Seconds
2 Seconds
* 5 Seconds
10 Seconds
20 Seconds

Zebra DS8178 Specifications

General

Product color	Black
Housing material	-
International Protection (IP) code	IP42
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	Photo diode
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 60 °
Optical sensor resolution	1280 pixels
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
PC connection	RS-232/USB
Wireless range	100 m
Bluetooth version	4.0
Standard interfaces	USB, RS-232, Bluetooth
Connectivity technology	Wired & Wireless
Battery life	83 h
Battery capacity	2500 mAh
Power source type	Battery

Weight and Dimensions

Depth	107 mm
Width	66 mm
Height	168 mm
Weight	235.3 g