Zebra DS8178

8 - 22 DS8178 Digital Scanner Product Reference Guide
Boot Up Event
Parameter # 258 (SSI # F0h 02h)
When enabled, the digital scanner generates a message to the host whenever power is applied. When disabled,
no notification is sent.
Parameter Event
Parameter # 259 (SSI # F0h 03h)
When enabled, the digital scanner generates a message to the host when one of the events specified in Table 8-4
on page 8-21 occurs. When disabled, no notification is sent.
Enable Boot Up Event
(1)
*Disable Boot Up Event
(0)
Enable Parameter Event
(1)
*Disable Parameter Event
(0)