Name: Zebra ZXP 1 Series
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

D: CardSense Single Card Feed Option

P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 217

Printing a Single Card

Step 1. Cards are inserted one at a time into the slot on the front of the printer. Do not feed

more than one card at a time. Note that the card must be fully inserted before printer

turns on and accepts the card.

Step 2. The card is printed.

Step 3. The printed card is ejected out through the same (input) slot.

INSERT CARD

ZEBRA

ZXP Series 1

Note • If single-card feeding will be the normal mode of operation, you may select that

mode through the driver software. In single-card feed mode, the card will not be printed until

the print job has been sent to the printer and the card to be printed has been inserted into the

single-card feed slot

Questions and Answers:

Need help?

Do you have a question about the Zebra ZXP 1 Series and is the answer not in the manual?

Zebra ZXP 1 Series Specifications

General