Zebra ZXP 1 Series User Manual

2: Installation and Setup
Changing the Printer Driver Options
P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 57
• Black extraction from color images:
- Print black with K panel:
• Defined areas applies black extraction to areas of the image inside of the zones
specified in the Area manager.
• Undefined areas applies black extraction to areas of the image outside of the
zones specified in the Area manager.
• Full card applies black extraction to the entire image.
- Black level: Every dot of a printed image has an RGB color value that ranges
from 0, 0, 0 (pure black) to 255, 255, 255 (pure white). The black level setting
allows the user to specify the threshold value for any given dot to be treated as black.
The maximum setting is R25, G25, B25.

Zebra ZXP 1 Series Specifications

General

Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50-60 Hz
Print Technology	Dye sublimation
Card Capacity	100 cards (input hopper)
Card Size	CR-80 ISO 7810
Dimensions	368 mm (D)
Memory	32 MB
Operating Temperature	15°C to 30°C
Operating Humidity	20% to 65% non-condensing
Card Thickness	0.3mm - 1.06mm