Zener MSC-3 - Input;Output Configuration; G00 Input;Output Menu; G01 Input Function Configuration

IM00120
89
IM00120
MSC-3 Instruction Manual
G00 INPUT/OUTPUT Menu
Easily the menu containing the most conguration parameters, the G00 INPUT/OUTPUT menu is where
all terminal strip congurations are found.
G01 Inpt fxn CFG
This menu provides a way to map a nite set of physical digital inputs to an internal set of input
functions. This allows the input function to be controlled by a selected physical input terminal. In most
cases the inputs levels and edges are available for selection. For example digital input D1 is found at
terminal 2 and is identied as D1(2). The choices are:
Selection Input Truth
D1(2) Active high level is selected
~D1(2) Active low level is selected
/D1(2) Active rising edge is selected
D1(2)\ Active falling edge is selected
For all the sub menus of G01 Inpt fxn CFG the available choices are:
ON, OFF
EN(6), ~EN(6), /EN(6), EN(6)\
D1(2), ~D1(2), /D1(2), D1(2)\
D2(3), ~D2(3), /D2(3), D2(3)\
D3(4), ~D3(4), /D3(4), D3(4)\
D4(4), ~D4(4), /D4(4), D4(4)\
D1(31)1, ~D1(31)1, /D1(31)
1
, D1(31)\
1
D2(32)1, ~D2(32)1, /D2(32)
1
, D2(32)\
1
D3(33)1, ~D3(33)1, /D3(33)
1
, D3(33)\
1
D4(34)1, ~D4(34)1, /D4(34)
1
, D4(34)\
1
D1(51)1, ~D1(51)1, /D1(51)
1
, D1(51)\
1
D2(52)1, ~D2(52)1, /D2(52)
1
, D2(52)\
1
D3(53)1, ~D3(53)1, /D3(53)
1
, D3(53)\
1
D4(54)1, ~D4(54)1, /D4(54)
1
, D4(54)\
1
TMR1, ~TMR1, TMR2, ~TMR2
Hi AI(10,11), ~Hi AI(10,11), Lo AI(10,11), ~Lo AI(10,11)
Hi AI(39,40)
1
, ~Hi AI(39,40)
1
, Lo AI(39,40)
1
, ~Lo AI(39,40)
1
Hi AI(59,60)
1
, ~Hi AI(59,60)
1
, Lo AI(59,60)
1
, ~Lo AI(59,60)
1
1
Only visible if extended features card tted