MSC-3 Instruction Manual
C011 IDLE DELAY
C011 IDLE DELAY
0 secs
Range: 0…600secs
• Press to edit the value.
• Press ▲/ ▼ to make changes to the value.
• Press to accept the new value OR
• Press ESC to abandon the value change.
The C011 IDLE DELAY sets the time interval of operation at minimum speed before the MSC-3 enters
the idle state. Refer to “Minimum Speed Idle Function” for details.
C012 RESUME Hz
C012 RESUME Hz
0 Hz
Range: 0…200 Hz
• Press to edit the value.
• Press ▲/ ▼ to make changes to the value.
• Press to accept the new value OR
• Press ESC to abandon the value change.
The C012 RESUME Hz is the speed reference threshold above which the MSC-3 resumes normal
operation from being idle. If the value for C012 RESUME Hz is less than the C010 MIN Hz value, the idle
function is disabled and the MSC3 will operate at or above the C010 MIN Hz speed indenitely. . Refer
to “Minimum Speed Idle Function” for details.
C02 MAX Hz
C02 MAX Hz
50 Hz
Range: C010 MIN Hz+5Hz…200 Hz
• Press to edit the value.
• Press ▲/ ▼ to make changes to the value.
• Press to accept the new value OR
• Press ESC to abandon the value change.
The C012 RESUME Hz is the speed reference threshold above which the MSC-3 resumes normal
operation from being idle. If the value for C012 RESUME Hz is less than the C010 MIN Hz value, the idle
function is disabled and the MSC3 will operate at or above the C010 MIN Hz speed indenitely.
To Next Page
Loading...
Need help?
General