119
Safety guidelines
1.2 Prescribed use
The embroidery machine is designed for industrial use. It is intended for nishing
textiles and similar materials by embroidering. If the machine is tted with the
requisite auxiliaries, it can also embroider sequins and cord, and execute boring
patterns.
The machine can be used with textile fabrics and threads that are customary in
embroidery. Our customer service organization will be pleased to advise you, and
is also available for testing unfamiliar material combinations on your behalf.
On principle, do not use the machine for purposes other than described in the
operator’s guide. It must not be used, for example, as a support surface or in place
of a step ladder. Utilization for other than the intended purpose can give rise to
risks of personal injury and material damage.
The following conditions must be met for a safe operation of the machine:
Ambient temperature from 15 ° C to 35 ° C.
Relative humidity of 30% to 85% non-condensing.
Direct sunlight on the machine should be avoided.
Electromagnetic compatibility
This machine is a class-A device. It can cause radio interference
in residential areas; in such cases the operator may be required
to take appropriate measures.
To Next Page
